The large circular holes will be dice-rolling trays. The medium holes are for the cup holders. The center holes is for the TV screen. The two small round holes are for the speakers. The big corner cut out is for the "access panel" to reach the ChromeBox inside the table. It runs the TV display.
There is also a tiny hole on the far side of the TV from the speakers. It will hold a small USB mic for sound pickup that will hopefully allow anyone playing remotely via Roll20 to hear the other players. There is another small mic attached to my laptop that will be at the "DM side" of the table (corner across from the Chromebox). Hopefully the mics will be far enough from each other the speakers to avoid feedback (The TV sound will be muted).
I meant to glue the table leg pieces together as well as using the wood screws, but I forgot. Each leg is held together by three screws, so they are pretty secure. I still need to drill the holes for the securing lag bolts into the frame and the legs. There will be two per leg.
If the weather holds, I will stain the table this weekend. Then I will be able to run the wires for the outlets, etc. and attach the tabletop to the frame. The legs won't get attached until I can bring it inside and down to the basement.
No comments:
Post a Comment